Contact Us

Contact Information

* Required Fields

Contact Us Contact Us

Handrails

Stainless Steel Handrail Melbourne, Australia

Keble’s Trading offers a wide array of stainless steel handrail fittings that cater to your specific requirements giving you the confidence to deliver ace-caliber projects for your customers. Our variety of tube and fittings, brackets, joiners, and end caps are available in various sizes that will suit your every need.

They are all made of 304 and 316-grade stainless steel in satin or mirror finish to give you the design freedom to provide that balance between function and aesthetics for your next project. We have reliable technical staff to assist you every step of the journey. Our products are manufactured to ensure you get a consistent dependable-quality product.

Please Note: Keble’s Trading makes no recommendations or claims for the performance and mechanical properties of Stainless Steel and or materials and accepts no responsibility or liability whatsoever for any unsatisfactory outcome, unsuitable application or installation of these components. 

Furthermore, Keble’s Trading Pty Ltd makes no recommendations and takes no responsibility for the use of any components or products used in the installation of any Balustrading and Handrail system designs. 

The responsibility of ALL design and choice of component for compliance to Australian Standard and relevant codes lies solely with the purchaser. Please consult appropriate authorities and or the advice of professional persons for information on correct design and installation techniques.

Stainless Steel Tubing Supplies in Australia

Our extensive range of stainless steel tubing has all bases covered. Available in round, square and slotted profiles, our durable products are an excellent choice for your next balustrade, stairs or handrail project. Our tube is suitable for all residential property and commercial construction applications.

We only source stainless tube from reputable manufacturers to ensure that we give you good quality products. With a variety of sizes in mirror or satin finish in stock, we are certain to have a stainless steel tubing solution to fulfill your requirements.

Speak to our friendly specialist staff in-house who are geared up to assist you on your next project.

Contact Stainless Steel Tube Supplier Today

Turn to Keble’s Trading for reliable-grade STAINLESS STEEL TUBE.  Talk to us! We speak your language! We understand your business. Call us at 1-800-067-687 or fill out the contact us form below.  No inquiry is too large or too small. We would love to be of service to you today!

Keble’s Trading is Right product, Right price, On-time

DISCLAIMER:

Please Note: Keble’s Trading makes no recommendations or claims for the performance and mechanical properties of Stainless Steel and or materials and accepts no responsibility or liability whatsoever for any unsatisfactory outcome, unsuitable application or installation of these components. 

Furthermore, Keble’s Trading Pty Ltd makes no recommendations and takes no responsibility for the use of any components or products used in the installation of any Balustrading and Handrail system designs. 

The responsibility of ALL design and choice of component for compliance to Australian Standard and relevant codes lies solely with the purchaser. Please consult appropriate authorities and or the advice of professional persons for information on correct design and installation techniques. 

 

HANDRAIL &

BALUSTRADE

EDITION 2020

TUBE & WELD-ON

FITTINGS

www.keblestrading.com.au

STAINLESS STEEL INFORMATION

1.It is an often held belief that stainless steel is “maintenance free”. This however is not necessarily cor- rect. All grades of stainless steel are susceptible to some form of staining or discolouration and periodic cleaning is required.

2.Stainless steel, if not properly maintained will discolour via a process called tea staining.

3.The staining rate and the required maintenance of stainless steel is relative to its environment, surface finish, design, grade of material and exposure.

4.For example,

a.An outside balustrade installation along Melbourne’s Bayside or Coastal Areas would experience a faster rate of tea staining due to the environmental conditions and would therefore require more frequent maintenance than an indoor stairway balustrade installed in an inner Melbourne suburb of say - Blackburn.

b.Due to the relative smoothness of the surface finish, a stainless steel component with a satin finish will display signs of tea staining much sooner than a highly polished component of the same grade.

c.Designs that incorporate poor run off (rainwater / washing water / etc) provide areas for stagnant water to collect which may increase the likelihood of tea staining.

5.We therefore suggest that you enquire about appropriate products available for the cleaning and mainte- nance of stainless steel.

DISCLAIMER

1.The above information is only given as a guide or general information. If the information given is in- sufficient, or if you are not satisfied, or certain, we suggest you seek further advice from a professional metallurgist.

2.For safety, structural and strategic applications, independent engineering or specialist advice should be sought from the relevant authorities/experts. Based on this advice, our sales consultants can assist with the supply of rated fittings for these applications as recommended/nominated by your professional, qualified engineer. Under no circumstances is Keble’s Trading Pty Ltd or its staff authorized or qualified to make any recommendations whatsoever regarding design or selection of fittings for such applications.

3.Keble’s Trading makes no recommendations or claims for the performance and mechanical properties of Stainless Steel and accepts no responsibility or liability whatsoever for any unsatisfactory outcome, unsuitable application or installation of these products.

4.Keble’s Trading Pty Ltd makes no recommendations and takes no responsibility for the use of any fastening system or products used in the installation of any Balustrading and Handrail components. The responsibility of the design and choice of fastener for compliance to Aust Standard and relevant codes lies soley with the purchaser. Please consult appropriate authorities and or the advice of professional persons for information on correct design and installation techniques.

5.While every effort has been made to ensure that all information contained in this brochure is correct at the time of printing, Keble’s Trading Pty Ltd will not be held responsible for any errors, omissions or changes in dimensions at the time or after publication of this brochure. We therefore strongly advise that you check all item details with our sales staff at the time of ordering as changes may occur without prior notice.

22020 EDITION

DANDENONG

CAMPBELLFIELD

LAVERTON NORTH

KILSYTH STH

Call: (03) 9794 5570

Call: (03) 9357 9611

Call: (03) 9314 4599

Call: (03) 9761 4125

info@keblestrading.com.au

www.keblestrading.com.au

1 Round Welded Tube ASTM A554

5 Square Slotted

Tube

9 Wall Bracket with

Dynabolt Set

13 SS Tube Bends

53º G316

2 Square Welded Tube ASTM A554

6Rectangular Slotted Tube

10 Stand-off Handrail

Bracket

14 Handrail Return

180º G316

3Rectangular Welded Tube ASTM A554

7 Weld On Tube Joint

G304

11 SS Tube Bends

15 Tube Clamp

4 Round Slotted Tube

8 L Bar

12 SS Tube Bends (Extended One Leg)

16 Rail Converter

G316

Availability and specifications are subject to change without prior notice.

1800 067 687 “We have the right product at the right price, on time every time”

3

17 Bolt Down Adjust- 18 Wall Bracket G316

19 Handrail

able Foot G304

Bracket-Bolt Mount

 

 

 

 

 

 

 

 

 

 

21 Tube Cover G316 22 Round Base Plate

 

23 Round Cover Plate

 

 

and Cover

 

Only

 

 

 

 

 

 

 

 

 

 

25 Long Flange (Cast)

26 Short Flange

 

27 Round Flange

 

 

(Cast)

 

 

 

 

 

 

 

 

 

 

 

 

29 Curved Tube Cap

30 Push End Cap

31 Sleeve Flange

(Cast) G316

 

 

Availability and specifications are subject to change without prior notice.

20 Plate and Cover

Set

24 SS Mounting Plate

3-Hole G316

28 Dome End Cap

32 Railing Joint

42020 EDITION

DANDENONG

CAMPBELLFIELD

LAVERTON NORTH

KILSYTH STH

Call: (03) 9794 5570

Call: (03) 9357 9611

Call: (03) 9314 4599

Call: (03) 9761 4125

info@keblestrading.com.au

www.keblestrading.com.au

33 Square Tube Cap 34 Square Base Plate

35 Square Base Plate

36 Square Tube

and Cover

and Cover

Cover

Availability and specifications are subject to change without prior notice.

1800 067 687 “We have the right product at the right price, on time every time”

5