Home > Collared Lifting Eyebolts
Collared Lifting Eyebolts
- Working Load Limit - WLLs are applicable when the stated load is applied along the vertical axis of the eyebolt.
- Safe Working Load - SWLs are applicable when used for specific lifting configurations under different working conditions.
- Safety Factor - Both metric & imperial eyebolts have a safety factor of 6:1. All thread forms must be checked prior to installation.
- Thread Selection - Extreme care must be exercised in ensuring that an eyebolt's thread form & the thread form in the corresponding hole or nut is the same.
- Collar & Face Seating - In order to achieve the WLLs shown, the collar face & the contacting face must be flat, smooth, & must be perpendicular to the threaded hole.
- Eyebolt Maintenance - When eyebolts are reused, it is strongly recommended that they are critically examined periodically for wear on the thread form or for any bruising.
- Correct Fitting of Eyebolt Pairs - When using eyebolts in pairs, it is essential that care be taken to properly align them. Eyebolts must not be forced into alignment as over stressing will reduce their safe working load.
Please Note: Product information quoted on this website are intended to be used for reference only. If product dimensions are critical to your application, please contact us for assistance. Keble’s Trading Pty Ltd strongly recommend that you confirm all relevant details before ordering as information is subject to change without prior notice.
|
Collared Lifting Eyebolts - Eyebolts Long Shank
|
|
|
|
|
|
|
|
Collared Lifting Eyebolts-Load Chart
|
|
|
|
|
|
|
|
|
|
)
)
)
)
)
)